skip to Main Content

SNARE DRUM PRICING IN CANADIAN DOLLARS 

Stave drums up to 8″ deep

10″ snare drum $550

12″ snare drum $575

13″ snare drum $600

14″ snare drum $600

15″ snare drum $625

16″ snare drum (with floor tom legs) $650

This will include a regional species wood such as Maple, Walnut, Cherry, Hickory, Red Oak, White Oak, Poplar and Birch. Staves are machined to 11mm as standard.

STABLE-STAVE or STRAIGHT-STAVE construction as standard..  (I install maple stave reinforcement rings in all my drums now unless requested otherwise.)

The finish will be a clear high build satin sheen

Hoops will be 2.3mm triple flanged or 2.3mm stick savers for 14″

Lugs will be single ended mini modern tube lugs unless its a piccolo

Throw will be a lever action die-cast, 2 models available..

20 strand Brass wires

Small round to 30 degree bearing edges

 

Upgrades from there-

 

SUPER-STAVE construction method +$100

SLIM-STAVE construction method +$100

Diecast hoops +$50  (13″ and 14″ only)

42 strand wires +$15  (14″ only)

Special round over bearing edge on batter side +$25

Mirror gloss shine +$100

Trick 3-step Throw off +$130

AVA self aligning lugs +$17.50 per lug

Nickel black hardware colour +$25

Gold coloured hardware +$50 (Limited stock)

Stains, fades, colouring +$50-$100

Exotic woods – priced per inquiry.

 

This is a pic of stock hardware options, most of these are available in Chrome, Black Nickel and some Brass

 

This pic below has the upgrade options pictured.

Die-cast hoops available in Chrome, Black Nickel and polished Brass

Trick Throw in Chrome and Black

Billet AVA Lugs anodised in Clear or Black.

 

 

 

CAST SNARE DRUMS

These have a base price of $1200 Canadian Dollars.

Same upgrade price points as per stave drums above.

 

 

 

FULL KIT PRICING

 

Drum kit pricing starts at $65 Canadian dollars per inch diameter regardless of depth (e.g. 10 + 12 + 14 + 22 = 58 x 65 = $3770)

This will include a regional species wood such as Maple, Walnut, Cherry, Hickory, Red Oak, White Oak, Poplar and Birch. Stave thickness is relative to shell diameter. Ranging from 8-12mm

I install stave maple reinforcement rings in all my drums now unless requested otherwise

The finish will be a clear high build satin sheen

Hoops will be 2.3mm triple flanged with RIMS mounts for toms

Special round over bearing edge on all toms and bass drums as standard

Polished Finish is $75 per inch Diameter

Stains, fades, hardware colours and exotic woods all discussed per inquiry

 

 

www.xe.com is handy for exchange rates to your currency!

Let’s build!!

Thanks!

 

Craig